Nouveau : Traduire du texte avec ChatDico – 172 langues

Dictionnaire français - anglais

Vitesses dessai

Test speeds

général - eur-lex.europa.eu

Les vitesses dessai sont toutefois différentes.

However, the test speeds are different.

général - eur-lex.europa.eu

Avec le véhicule en charge, répéter les cinq arrêts à chaque vitesse dessai en alternant les deux vitesses dessai.

With the vehicle laden, repeat the five stops at each test speed while alternating between the two test speeds.

organisation des transports - eur-lex.europa.eu

Il doit être satisfait à lensemble des prescriptions pertinentes pour les deux vitesses dessai.

All the relevant requirements shall be met for both test speeds.

général - eur-lex.europa.eu

Aux vitesses dessai spécifiées au paragraphe 5.2.5 ci-dessus, la relation entre la vitesse affichée V1 et la vitesse réelle V2 doit être la suivante

At the test speeds specified in paragraph 5.2.5 above, there shall be the following relationship between the speed displayed (V1) and the true speed (V2).

général - eur-lex.europa.eu

Vitesses dessai

Publications scientifiques

▷

The brittle-ductile transition of polycarbonate as function of test speed... At high test speeds, a sharp brittle-ductile transition was observed, while at low test speeds the transition was more gradual, via a mixed mode region....

général - core.ac.uk - PDF: www.loc.gov

▷

New impact specimen for adhesives: optimization of high-speed-loaded adhesive joints... The specimen is tested with three adhesives at five layer thicknesses, and at three test speeds....

général - core.ac.uk - PDF: www.loc.gov

▷

Effect of thermal aging on high speed ball shear and pull tests of snagcu lead-free solder balls... Traditional ball shear and pull tests are not considered suitable for evaluation of joint reliability under drop loading, since the applied test speeds, usually lower than 5 mm/s, are well below the impact velocity applied to the solder joint in a drop test....

général - core.ac.uk - PDF: gateway.isiknowledge.com

▷

Brittle failure mechanism of snagcu and snpb solder balls during high speed ball shear and cold ball pull tests... The ball shear test speeds ranged from 10 mm/s to 3000 mm/s, while the ball pull test speeds ranged from 5 mm/s to 500 mm/s....

général - core.ac.uk - PDF: www.scopus.com

▷

Static pressure effects on... These experimentally determined forces were resolved into lift and drag following a determination of stern seal shape at each of the test speeds....

général - core.ac.uk - PDF: calhoun.nps.edu