Upon receiving an energy reduction value from a remote source, the control unit then calculates a permitted run time from the energy reduction value and the connected load value.

Also referenced as the D10 Value or decimal reduction value.

The filter may have a Log reduction value for viruses of at least 4 and a Log reduction value for bacteria of at least 6.

The global scheduling change feature comprises a 'watering reduction value'.

Thus, the waveform of the base-band signal is analyzed to calculate the estimated value of the back-off value.

Preferably the 'watering reduction value' is set during manufacture or distribution and at a value of 80%.

The back-off value is a value related to the timing of transmitting an RA preamble at a mobile station (UE).

The meter displays the amount of the reduction, in decibels.

In one aspect, the PAR back off value is at least partially based on modulation type.

The noise emission reduction to be achieved had to be ≥2dB(A).

The present application discloses systems and methods for adjusting a back-off value for a rank.

In this first mode, the congestion message identifies the selected connection to be adjusted and further includes an adjustment value (e.g., power reduction value) for the selected connection to be adjusted.

In another aspect, the PAR back off value is more for higher order QAM than for QPSK.

T represents the temperature (°C) of the support during cast, CS represents the moving speed (m/min) of the support, and ΔP represents pressure reduction value (Pa) by the pressure reducing means.

It is, therefore, unnecessary to calculate the back-off value for each combination of code channels and to prepare a table.