A three-jaw chuck, is removably mounted in the four-jaw chuck (106) for holding forging stocks (18) of regular cross-section.
A drill chuck which has an anti-loosening function includes a chuck body, a nut, three jaws, a bearing, a front sleeve and a rear sleeve.
Then, when it is your birthday, play Pass the Parcel.
How Do I Convert a Three-Jaw Drill Chuck to an SDS Drill?
How do I convert a three-jaw drill chuck to an sds drill?
The bead wire is pressed by means of at least three jaws (8, 10, 12, 14) in contact with a perimeter of a section of said area.
In a three jaw chuck (5) the traditional chip guard is replaced by a stop guard (50) having internal threads.
A rotor section can be constructed to accommodate a three jaw flexible coupling and spider, eliminating the need of a shaft extension and one halft of a flexible coupling.
A three-jaw (34) chuck is provided with a unitary nut (48) rotatably mounted relative the body (16) and a retaining member (46) located so as to contact a portion of the unitary nut (48) to prevent axial movement of the nut (48) in the forward direction.
Requêtes fréquentes français :1-200, -1k, -2k, -3k, -4k, -5k, -7k, -10k, -20k, -40k, -100k, -200k, -500k, -1000k,
Requêtes fréquentes anglais :1-200, -1k, -2k, -3k, -4k, -5k, -7k, -10k, -20k, -40k, -100k, -200k, -500k, -1000k,
Traduction Translation Traducción Übersetzung Tradução Traduzione Traducere Vertaling Tłumaczenie Mετάφραση Oversættelse Översättning Käännös Aistriúchán Traduzzjoni Prevajanje Vertimas Tõlge Preklad Fordítás Tulkojumi Превод Překlad Prijevod 翻訳 번역 翻译 Перевод