The fastening means (3) comprise a fastening member (4) for coupling said at least one protection casing (2) to said rim (14) removably and adjustably depending on the size of the rim (14).

The first information-bearing indicium includes rim size information and is a larger size having a greater radial height relative to the second information-bearing indicium.

Usually immediately after the internal construction, it's the rim size for which the tie was fitted.

Besides, the company decides to give good size of car’s rim which supports its performance.

Tyre diameter has also increased slightly though the rim size has been unchanged at 13 inches.

When you increase the size of the rim to 25 mm, the acceptable tire sizes greatly increase to somewhere between 44 mm and 57 mm.

The rim to be used for measurements and the rim to be used for tests.

The rim insertion portion (3) is of a reduced size not obstructive to the mounting of the tyre.

rim contour designation nominal rim diameter

The other of the bottom rim (2) or the top rim (3) has an end surface facing the one rim.

The fastening means (3) comprise a fastening member (4) for coupling said at least one protection casing (2) to said rim (14) removably and adjustably depending on the size of the rim (14).

Wheel size designation means a designation comprising at least the nominal rim diameter, the nominal rim width and the rim profile

Further, the mounting of a rim set and a core is facilitated and when rubber is used for the elastic member, rim-integrated vulcanization becomes unnecessary, thus making size reduction of the vulcanizing device possible.

(Just make sure you know your size before purchasing.)

Press-in members are adjusted in the direction of the rim in order to press in the rim edge, whereafter the rim can be pressed out.