Dictionnaire français - anglais

polyéthylène-térephtalate-glycol

industrie - iate.europa.eu
Ce matériau est produit à partir d'un mélange fait pour environ 5 % à 50 % de sa masse de PETG (polyéthylène-téréphtalate-glycol) et pour environ 50 % à 95 % de sa masse de PET (polyéthylène-téréphtalate).

The material is produced from a blend including between approximately 5 % and 50 % by weight of PETG, and between approximately 50 % and 95 % by weight of PET.

chimie - wipo.int
polyéthylène-térephtalate-glycol
industrie - iate.europa.eu
Comparison of ultem 9085 used in fused deposition modelling (fdm) with polytherimide blendsPolyetherimide (PEI) blends modified by either polycarbonate (PC) or polyethylene terephthalate glycol-modified (PETG) were prepared...
général - core.ac.uk - PDF: doaj.org
Mechanical properties of fdm and sla low-cost 3-d prints ... Tests have been conducted using ABS, fiberglass reinforced polyethylene terephthalate glycol (Z-Glass) and a Nobel printer photoresistive resin...
Development of radio-frequency heating-assisted nanoimprint with petg solution for nanostructure-based biosensors... The chips were spin-coated using a RF-sensitive polymer film, namely polyethylene terephthalate glycol-modified (PETG)...
 PDF: doaj.org
Drawing optical fibers from three-dimensional printers... As proof of principle, coreless optical fibers (φ = 30 μm) made from fluorinated acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) are drawn...
Original article mechanical evaluation of newly developed mouthpiece using polyethylene terephthalate glycol for transoral robotic surgery... To prevent such intra-operative tooth injuries, we created a mouthpiece made of polyethylene terephthalate glycol (PETG) individually shaped for the patient’s teeth...
 PDF: ftp:

Publications scientifiques

Kr-f laser surface treatment of poly(methyl methacrylate, glycol-modified poly(ethylene terephthalate) , and polytetrafluoroethylene for enhanced adhesion of escherichia coli k-12... This study investigates Kr-F excimer laser (248 nm) surface modification of polymethyl methacrylate (PMMA), glycol-modified polyethylene terephthalate (PETG), and polytetrafluoroethylene (PTFE) and its effect on the adhesion of Escherichia coli K-12 bacteria...
chimie / politique de l'environnement - core.ac.uk - PDF: scholar.lib.vt.edu
Photoinduced degradation of polymer films using polyglyoxylate–polyesterblends and copolymers... Poly­(ethylglyoxylate) (PEtG) is a promising SIP because of its depolymerizationto benign products, but its amorphous structure and low glass-transitiontemperature make it unsuitable alone for coating applications...
général - core.ac.uk - PDF: figshare.com
Novel ph-sensitive polyacetal-based block copolymers for controlled drug delivery... Poly(ethylene glycol)-poly(ethyl glyoxylate)-poly(ethylene glycol) (PEG-PEtG-PEG) triblock copolymers with PEG molecular weights 500 (PEtG-PEG500) and 750 (PEtG-PEG750) were synthesized by PEtG end-capping with methoxy PEG via a carbamate linkage...
général - core.ac.uk - PDF: linkinghub.elsevier.com
Crack propagation along polymer/non-polymer interfaces... Specifically, the systems studied are Poly-Ethylene Terephthalate (PETG) spin-coated on Al, PETG-glass and PETG hot-pressed on Cr-sputtered glass...
général - core.ac.uk - PDF: zernike.eldoc.ub.rug.nl
Modification of substandard epdm with amorphous thermoplastic polyesters (petg and pef): microstructure and physical propertiesThe phase morphology, thermal behavior and mechanical properties of two series of polymer blends based on ethylene/propylene/diene rubber (EPDM) and amorphous homologues of poly(ethylene terephthalate), i...
général - core.ac.uk - PDF: doaj.org

Synonymes et termes associés français



1 milliard de traductions classées par domaine d'activité en 28 langues