Position of the Target Area in the XY plane

Dimensions and position of the target area (TA) in the XY plane (viewed from below

The input device (1) can be moved slidingly by the user in the XY plane.

The position of the centre of the prohibitive zone in the X-Y plane shall be

An RF excitation system (10) is provided for generating radio-frequency (RF) pulses for flipping aligned spins into a transverse plane such as the XY plane or to have a component in the XY plane.

Dimensions of the prohibitive zone (PZ) in the XY plane (viewed from below) showing a possible position of a target area

A drive table is used for positioning the drill assembly in an XY plane.

The cleaning plate assembly has a minimum treatment dimension measured parallel to the XY plane.

The reflection plane of a first mirror is disposed almost vertical to the yz plane and tilted at about 45 deg. to the xy plane.

A positioning system for moving a device over an xy-plane has a drive mechanism with pivotable arms for moving a carriage over the xy-plane by driving it from one side.

The section with the vertical xy-plane is in fact a circle.

The detecting unit detects the angular velocity around an axis in a Z-axis direction orthogonal to the XY-plane on the basis of the amount of deformation of the frame vibrating in the vibrational mode within the XY-plane.

A machine for treating a surface lying in an XY plane.

In 2D, you specify points on the XY plane, also called the construction plane.

The reference axis y' is parallel to the global XY plane.