The composite torque command is convertible into a direct-axis current command and a quadrature-axis current command (S302).

If this is the case, the element for holding and releasing the token activates the immobiliser and releases the token.

The sensitivity of the adjusted setpoint value to changes in the dimmer setpoint value is low at low values of the dimmer setpoint value.

A setting means (11) sets the alarm set value that is a threshold value at which alarm information relating to the vehicle state is announced.

The switch mode battery charger output setpoint is adjusted based on the setpoint voltage.

A current regulator produces a voltage command to the motor based on the current command input.

The summer (119) adds the d-axis current adjustment command to a d-axis current command received from a lookup table (e.g., 109).

The d-axis current adjustment command is used for reducing the terminal voltage command below the determined voltage limit.

There is nothing to understand, said the lamplighter. -Orders are orders.

In order to use the trolley, a token must be inserted into the element for holding and releasing the token, thus deactivating the immobiliser.

Note: Target 2 is directly connected to the drives reference limit.

Apply "Combat and Resist!," which is the common slogan for the class.

Note: Reference 2 is directly connected to the drive reference limit.

You will receive the battery deposit back from us upon presenting the acknowledged deposit sticker.

Note: Reference 2 is directly connected to the drive reference limit.