Consideration of the cross-aisle forces of location.

Horizontal forces are supported by support point pairs 8.

The D or Dc value is the theoretical reference value for the horizontal forces in the towing vehicle and the trailer and is used as the basis for horizontal loads in the dynamic tests.

The D or Dc value is the theoretical reference value for the horizontal forces in the towing vehicle and the trailer and is used as the basis for horizontal loads in the dynamic tests.

An inclined structural pile installed to resist horizontal forces.

longitudinal stiffness of vehicles and horizontal forces impacting on the track

The fail-safe mechanism includes a latching structure which applies horizontal forces to the connector.

The shear forces (horizontal forces in the joints) are very strong.

Horizontal forces are transmitted between the cap element (8) and the cup-shaped element (4) via a horizontal bearing (12).

Thus, a good dampening of vibrations of the table is achieved in case of exposure to horizontal forces.

The horizontal forces caused by the cables are transferred as compressive forces into the main beam.

Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.

The horizontal pin also provides the mounting for force sensors; ensuring horizontal and/or vertical forces can be measured.

Horizontal forces at the height of the load levels corresponding to the imperfection.

The motion is horizontal and therefore we will only consider the forces in a horizontal direction.