Dictionnaire français - anglais

industrie mécanique - iate.europa.eu
Evaluation of fem based fracture mechanics technique to estimate life of an automotive forged steel crankshaft of a single cylinder diesel engine AbstractCrankshaft is one of the critical components of an IC engine, failure of which may result in disaster and makes engine useless unless costly repair performed....
industrie mécanique - core.ac.uk -
industrie mécanique - iate.europa.eu
High-resolution in vivo measurement of biomechanical features of the periodontium... The torques were produced by a digitally-controlled rotary magnet motor and applied to the buccal side of mandibular premolars by means of a flexible Cardan shaft....
général - core.ac.uk - PDF: www.actabio.pwr.wroc.pl
The finite element analysis of the rollers in a rotary steerable drilling tool...technology.When the system working,drilling pressure and torque are passed by the thrust bearings in the controlled bend sub oriented tool; therefore it is necessary to analysis the roller’s load distribution to verify the design parameters of variation cardan shaft, thrust bearings and roller are correct or not, This article analyzed thrust bearing’s rollers by ANSYS....
Stress analysis on drive shaft... A drive shaft, also known as a propeller shaft or Cardan shaft, it is a mechanical part that transmits the torque generated by a vehicle's engine into usable motive force to propel the vehicle....
Analytic solution of simplified cardan's shaft modelTorsional oscillations and stability assessment of the homokinetic Cardan shaft with a small misalignment angle is described in this paper....
 PDF: doaj.org
Real time cardan shaft state estimation of high-speed train based on ensemble empirical mode decompositionDue to the special location and structure of transmission system on high-speed train named CRH5, dynamic unbalance state of the cardan shaft will pose a threat to the train servicing safety, so effective methods that test the cardan shaft operating information and estimate the performance state in real...
 PDF: doaj.org
industrie mécanique - iate.europa.eu
Validation and use of simulink integrated, high fidelity, engine-invehicle simulation... The engine is coupled to the driveline, which consists of the torque converter, transmission, differential and prop shaft and drive shafts....
général - core.ac.uk - PDF: www2.engr.mun.ca
industrie mécanique - iate.europa.eu
A method to assess transverse vibration energy of ship propeller shaft for diagnostic purposes...propulsion system vibration diagnostics, which concerns assessing this part of mechanical energy transmitted from the main engine to the ship propeller which is dissipated due to propeller shaft vibration....
général - core.ac.uk - PDF: doaj.org
Considering propeller shaft forces during ship turning... Due to the increased propulsive power and propeller thrust, the propeller weights and the propeller shaft forces of these ships have become larger than those of past ones....
Finite element analysis of universal joint and propeller shaft assembly... Propeller shaft and the universal joints form the important links that help in transmitting power from the engine to the wheels....
Investigations on dynamic analysis of propeller shaft... Propeller shaft of most of the vehicles are found to show number of modes of failures....
Design and analysis of a propeller shaft in cae tool and ansysA Propeller Shaft is a device on which a propeller is attached to and transfers the power from the engine to the propeller....
 PDF: ijseat.com
industrie mécanique - iate.europa.eu
Ijedr1501024 international journal of engineering development and research (www.ijedr.org) 110... The angular velocity of driving shaft is maintained by the flexibility of cvt....
général - core.ac.uk - PDF: www.ijedr.org
Innovative design of self-decelerating escape device based on triz... The closed-loop mechanism consists of driving shaft, feedback shaft, drving gear, feedback gear and rope....
Experimental study on vibration reduction characteristics of gear shafts based on isfd installation position... Vibration reduction characteristics were experimentally studied at different speeds for cases where ISFD elastic damping supports were simultaneously installed on the driving and driven shafts, installed on the driven shaft, or only installed on the driving shaft....
 PDF: doaj.org
Analysis of moment transmitted by universal joint in varying operating condition... A model of shaft system driven by a universal joint which consists of a driving shaft, a driven shaft and a cross piece is chose....
The improved modal analysis of driving shaft for machine tool based on finite element model... The design of the driving shaft for the whole machine tool has a very important influence....
industrie mécanique - iate.europa.eu
Conical magnetic bearings developed for active stall control in gas turbine engines... The rotor bearing configuration will simulate that of the main shaft on a gas turbine engine....
industrie mécanique - core.ac.uk - PDF: hdl.handle.net
An experimental study of sensor-less fault diagnosis on rolling bearing of wind turbine generator system... The experiment results show that the stator current signal’s feature is familiar with the predicted failure frequency and the characteristic frequency of the main shaft frequency signal When rolling bearing fails, and provide the detecting sensor-less method of rolling bearing wind generator fault detection and diagnosis is feasible...

Publications scientifiques

Research on the mechanism of coordinate polishing crankshaft crankpin with abrasive belt... Under the conditions of crankshaft uniform rotation, the schematic diagram of coordinate polishing crankpin was analyzed and found that the grinding time and speech changed, when the abrasive grinded...
commercialisation / industrie mécanique / production et structures agricoles - core.ac.uk - PDF: www.scientific.net
Stress analysis and failure mechanism of h13 steel hot-forging die for automobile engine crankshaft... The hot forging process of automobile engine crankshaft was simulated in the present study on the basis of the finite element software DEFORM-3D....
commercialisation / industrie mécanique / production et structures agricoles - core.ac.uk - PDF: www.scientific.net
To the determination of the basic signatures of the tractor engines with the turboblower on acceleration of the crankshaft at the transient regime... On the basis of the given analysis the improvements of the methods and devices of investigations of the engines with the turboblower on the acceleration of the crankshaft at the transient regime are offered
détérioration de l'environnement / industrie mécanique / organisation des transports - core.ac.uk - PDF: vestnik.donstu.ru
Design and validation of improved dynamic cylinder pressure measurement for a diesel engine... This encoder system was found to have slipped off the crankshaft, resulting in the need for a new encoder mount system....
commercialisation / industrie mécanique - core.ac.uk - PDF: calhoun.nps.edu
Structural analysis of horizontal tidal current turbine main shaft... The stress condition of the tidal turbine’s main shaft was analyzed, and the analysis model of the shaft was established....
général - core.ac.uk - PDF: www.scientific.net

Traductions en contexte français - anglais

Lorsqu'il a terminé, il envoie la structure de son arbre de couche au processus parent via IPC.

When it’s done, it sends the structure of its layer tree to the parent process via IPC.

général - CCMatrix (Wikipedia + CommonCrawl)
L'aérogénérateur est constitué d'une turbine munie d'un arbre de couche et dont les pales sont fabriquées en bandes souples qui changent de forme en fonction de la position de rotation de la turbine

The wind turbine consists of a turbine having a horizontal shaft, the blades being constructed as flexible webs which change in shape depending on the rotational position thereof.

industrie mécanique - wipo.int


1 milliard de traductions classées par domaine d'activité en 28 langues