Tasks from a particular workload type are assigned to execute on a processor configured to support that workload type.
A method for detecting a load type is described.
In one implementation, the group of load types includes at least one check-type load.
The CoMP request specifies a first CoMP payload type.
If no processor set for a given workload type is present in a system, a task of that workload type may also be performed on a standard processor.
It includes a bidirectional audio stream and two bidirectional video streams, using H.261 (payload type 31) and MPEG (payload type 32).
This may then be assigned to either a static RTP payload type, or the payload type for this may be assigned dynamically.
Each of these load types may require a different style of control.
By checking the second header for a payload type field value, the transmitting side can determine whether the second header is related to the RTP packet or the RTCP packet based on the payload type field value.
In such a system, metering provides a measure of the normalized processing throughput utilized by processing tasks for each workload type supported by the system.
Most batteries do not receive this type of charge.
Each type of workload primarily draws from resources dedicated to that type of workload in the budget, as enforced by the operating system.
Depending on the type of application will determine the type of load required.
Type (8 bits): identifies the type of general payload.
This type of charging is called 3 step regulated charging.
This kind of charging is called 3 step regulated charging.
The impedance loads used by the system can be a resistive load, a capacitive load or an inductive load, depending on the type of impedance load that is desired for the soft start of the motor.
The load control unit (5) performs switching to a predetermined operation mode corresponding to the type of the illumination load (1) identified by the judgment unit (5a).
This is called parasitic charging and this kind of usage can apparently be quite damaging.
Charging Information: displays charge status, time settings, and charge level settings based on the charger you use.
Each type of truck is best suited for a specific type of load.
The new version 5.03.0050 of RFEM includes a new type of surface load named ‘Free Variable Load’.
Charge Type: Supports USB power adapters rated 12 V/2 A
The switch circuit is intended to supply electric power to any type of load.
The type of support connection determines the type of load that the support can resist.
During the process of rubbing, which charge is transferred from one object to another object?
Requêtes fréquentes français :1-200, -1k, -2k, -3k, -4k, -5k, -7k, -10k, -20k, -40k, -100k, -200k, -500k, -1000k,
Requêtes fréquentes anglais :1-200, -1k, -2k, -3k, -4k, -5k, -7k, -10k, -20k, -40k, -100k, -200k, -500k, -1000k,
Traduction Translation Traducción Übersetzung Tradução Traduzione Traducere Vertaling Tłumaczenie Mετάφραση Oversættelse Översättning Käännös Aistriúchán Traduzzjoni Prevajanje Vertimas Tõlge Preklad Fordítás Tulkojumi Превод Překlad Prijevod 翻訳 번역 翻译 Перевод