Unlike regular LED strip lights, these LED strips operate at mains voltage and don't require a low voltage transformer.

A special 1500 kVA offshore Low-Voltage transformer is also multi-tapped to give different low-voltage combinations for best power transmission across a range of networks.

In 1992, CIC became the first manufacturer in Taiwan to successfully produce a non-ventilated low-voltage transformer.

The secondary side of the inductive transformer (T1) forms the undervoltage side of the voltage transformer.

Regulators are connected to the voltage transformer, and the regulators receive the first low voltage signal from the voltage transformer and convert the first low voltage signal to a second low voltage signal.

The transformer secondary winding outputs a low voltage.

The low-voltage coil of the transformer (16) is connected to a transformer isolated switch (15).

A combined transformer is comprised of a transformer chamber, a low-voltage chamber, a high-voltage chamber and a radiator.

The low-voltage electric equipment is electrically connected to the transformer equipment.

An interface circuit connects between the medium voltage and low voltage sides of a step-down power transformer.

The displacement voltage is taken from the secondary side of the exciting transformer (2) by a single-phase low voltage transformer (4).

The single-phase transformer (TM) comprises a high-voltage coil (K) and a low-voltage coil (N).

The low voltage side of the transformer (3) is connected to the low voltage distribution equipment via a cable or a bus.

The voltage transformer transforms a high voltage of the power source to a first low voltage signal.

The medium voltage HTA is converted into low voltage BT with the aid of a HTA/BT transformer.