The capture rate has to be at least 85 % of CO2 from the flue gases to which capture is applied.

(b) the annual average rates of abstraction from such points,

(b) the annual average rates of abstraction from such points,

(b) the annual average rates of abstraction from such points,

Such porous oxygen scavenging materials can have a increased oxygen scavenging rate, when compared to oxygen scavenging materials of similar composition that have a non-porous structure.

In the case of all projects, a capture and storage rate that would reduce the plants carbon emissions by 65 % or greater

The capture rate has to be at least 85 % of CO2 emitted by the equipment included in the application for officially supported export credits.

CO2 capture rates of between 65% and 95% were demonstrated.

In the case of all projects, a capture and storage rate that would reduce the industrial or energy generation carbon emissions by 65 % or greater

In the first circuit S1, only a portion of the CO2 is captured (capture rate less than 90%) and the first absorbent solution (3) is regenerated in a dedicated device (E1, F1).

Repeated measurements at different field frequencies enable a collection-rate spectrum to be established and the particles under examination to be characterised or identified by reference to known spectra of known particles.

(e) for an existing unit referred to in subsection 13(4) of these Regulations, the rate of capture of CO2 emissions from the unit.

The capture rate has to be at least 85 % of CO2 from the flue gases to which capture is applied.

Ecapture installation = Tinput + Ewithout capture – Tfor storage

(b) the annual average rates of abstraction from such points,