If the active router fails, the standby router takes over as the active router.

In the first two tunneling methods listed above -- router-to-router and host-to-router -- the IPv6 packet is being tunneled to a router.

router, please refer to your router’s User Manual.

You’ll see the router’s IP address listed as “Router”.

One router is used as a parent router and only the router is made to manage the identification codes.

The router ID TLV contains the 4-octet router ID of the router originating the LSP.

If the standby router fails or becomes the active router, another router is elected as the standby router.

Tag: internet network security, network password, password protection for your router, router, router password, router security, router security options, WEP, WPA-PSK

A VRRP router called the master router controls the IPv4 or IPv6 address or addresses that are associated with the virtual router.

Listen The router knows the virtual IP address, but is neither the active router nor the standby router.

The router knows the virtual IP address, but is neither the active router nor the standby router.

An adjacent router is one that has received a hello packet from a neighbor.

The routing transit number or RTN is often simply called the routing number.

Tag: change the name of your network, find out the IP address of your router, network, network name, router, router IP, router IP address, router security, router settings, wireless connection name, wireless network

The router must hear a Hello packet from a neighbor.