The approximate maximum drill depth is defined at up to 35 mm.

This adjusts automatically or mechanically to the milling depth.

They include an electric motor that helps to adjust the milling depth.

This is capable of adapting both mechanically and automatically to the respective milling depth.

The drive unit is designed for a maximum milling depth of 33 cm.

This will make the milling depth range large and easy to replace the milling cutter.

The adoption of height adjustment system ensures accurate control of milling depth.

This adjusts mechanically or automatically to the current milling depth as required.

Among other things, it offers the possibility of achieving a milling depth of 70-600 millimeters and a milling width of 0-1,500 millimeters using various milling chains and a two-beam system.

It allows accurate milling of products without adjusting the depth of milling each time again, and reliably fixes the router in a predetermined position.

The milling depth is repeated without renewed setting, even on samples of different height.

The machines are capable of removing material at a milling width of up to 4.4 m and a milling depth of up to 35 cm in a single pass.

Depending on the depth of the milling, different impressions of brightness are created, thus making up the picture.

Feed speed, milling depth and cutting speed can all be set on the swiveling control terminal.

When using fixed upper hand milling machines, the depth of milling has to be adjusted by raising and lowering the tool.