The first supporting point is located between the second supporting point and the drive gear.

The fixed support provides the safety rope with a support point.

The terminal that has passed through the through hole is bent with the first supporting point as a supporting point.

The hat frame (2) is provided with a rear auxiliary supporting point (22) and/or a front auxiliary supporting point (23) A hat belt (3) is provided on the hat.

The blades (4) have a third support point.

  The lever rocks in the radial direction of the key rotor about the support point section as the fulcrum, with the support point section in contact with a support point receiving section of the key cylinder.

With the second supporting point as a supporting point, the terminal is bent until the terminal is substantially parallel to the main surface of the housing.

In this state, the pivot support point (30) of the latch member (9) is directly and pivotably supported by a curved support point (18) of the base (7).

Horizontal forces are supported by support point pairs 8.

A folding point (13) is arranged between the supporting point (12) and the shock point (11), and the folding point (13) divides the vibrating diaphragm (1) into two parts.

One end of the vibrating diaphragm (1) is a supporting point (12), and the other end is a shock point (11).

The centre of gravity is located at the support point of the device.

The transfer member has a point of support at the first and second end.

The beverage container is able to rotate around a supporting point (8) and to incline.

A second support point of the second support structure is pivotally connected to second and third North side supports (217, 218).