Nouveau : Traduire du texte avec ChatDico – 172 langues

Dictionnaire français - anglais

Les goujons de fixation extérieurs font saillie à travers des trous coopérants dans la plaquette de protection, en direction de la plaquette intérieure, et ils se vissent dans les extrémités adjacentes d'arbres de raccord tubulaires (36).

The outer fixing studs project through cooperating holes in the shield plate towards the inner face plate and screw into the adjacent ends of tubular connecting shafts (36).

industrie mécanique - wipo.int

▷

Steady-state vacuum ultraviolet exposure facility with automated lamp calibration and sample positioning fabricated... The three test cells are separated by a water-cooled copper shield plate assembly to minimize thermal effects from adjacent test cells....

général - core.ac.uk - PDF: hdl.handle.net

Three-dimensional analysis of ap600 standard plant shield building roof... This roof supports the passive containment cooling system (PCS) annular tank, shield plate and other nonstructural attachments....

PDF: digital.library.unt.edu

Application of the response surface methodology combined with the steepest method for improving the insulation capability of a gas-insulated switchgear... Especially the shape of the shield plate, which is newly suggested to reduce the electric field concentration around the triple junction point in the breaker compartment, is efficiently optimized by using...

PDF: repository.hanyang.ac.kr

Mechanical assessment of degraded waste packages and drip shields subject to vibratory ground motion vertical...6.2.1, the damage area is defined as the area on the inner and outer surfaces of the drip shield plate where the residual tensile stresses or the stresses due to longterm load exceed the threshold of 80 % of the yield strength for Titanium Grade 7 at 60°C (253 MPa)....

PDF: citeseerx.ist.psu.edu

Microstructure of induction brazed interface between cobalt-based alloy and martensitic stainless steel using ag-cu-zn filler metalErosion shield plate made of Cobalt-based alloy (Stellite Grade 6) was joined to Martensitic stainless steel (SUS410) by induction brazing uing Ag-Cu-Zn filler alloy at 650-790 °C and...

PDF: www.ojs.kmutnb.ac.th