Thus, galling may be prevented.

The bearing axle and the jaws may be made from materials that are prone to galling and the bearing may be made from a material that resists galling.

Such coatings may provide reduced wear, friction, corrosion and galling.

A percentage of graphite may be used in some of the formulas because of its excellent anti-galling and anti-seizing qualities.

Developed specifically for food and drink processing facilities, the new FOODLUBE Anti-Seize grease prevents galling and seizure of joints and fasteners.

Provided is an anti-seizing bolt capable of preventing seizing caused by the infiltration of sputter and other foreign material as well as seizing caused by oblique insertion.

The seal is devoid of disks or rings fastened to the shaft so as to slide freely, and operates temporarily even in case of seizing.

Thus, the sliding bearing exhibits enhanced seizing resistance.

After application, the seizing inhibitor forms a coating layer tenaciously adherent to the steel.

The aim of the invention is to prevent the seizing or clogging of an ignition device in the cylinder head, in particular, a spark plug (10), with a housing (12), provided with a mounting thread (14).

This enables an initial seizure resistance, and a post-abrasion seizure resistance and abrasion resistance of the overlaying layer to be improved.

The configuration enables the seizure of the actuator to be found early by self-diagnosis.

For example, cannabidiol (CBD) has been widely evaluated for its anti-seizure activity in various seizure models.

Thus, the shoe (4) more excellent in seizure resistance than an conventional one can be provided.

Pump rotors with improved seizure resistance.

A method for detection of pre-scuffing events in a large multicylinder two-stroke diesel engine by recognizing the characteristic temperature fluctuations of pre-scuffing events.

The chances of clearance-related scuffing and seizure are thereby increased proportionally.

Automatic countermeasures may be initiated after detection of the pre-scuffing event.

Automatic countermeasures may be initiated after detection of the pre-scuffing event.

This is solved by providing at least the contact portion of the opening/closing part with a sticking suppressing means for suppressing sticking.

When the latter is damaged, the friction coefficient increases slightly but without any danger of sticking.

Avoid stressing yourself out by sticking to longer cycles.

Avoid stressing yourself out by sticking with longer cycles.

The contacting portions of both the first and second elements are protected with a long-lasting lubricant to prevent the elements from sticking or adhering to each other.

Binding or wrinkling is therefore no caused by engagement of the cutter with the lines of perforations.

One of the benefits of the ETCS is the elimination of binding of the mechanical cable system.

The drawer is also laterally movable on the slides, which prevents jamming, binding and racking of the drawer if the slides are in a non-parallel position.

The jaw slots (22) and the annular flange (26) preferably extend radially without any axial component to prevent binding during adjustment and use.

Such configuration of the connector aids in installation by lessening instances of binding and align and guide the caps into their corresponding receiving areas.

servo-control jamming detection logic box

Because such sheets of paper are not conveyed to the discriminator, the probability of jamming can be reduced.

Recesses (251) between the cutting teeth store bone shavings to prevent jamming.

Right now, we are evaluating a new system called ‘Jymmin’ (jamming and gymnastic),” Dr. Rehfeld told.

Vigorous jamming of fingers anywhere should not happen immediately.