The image can reflect distribution of contact pressure, and can reflect pressure distribution and pressed order of the substances.

Distributes Pressure – Distribution of pressure is essential to all footwear.

These compliant electrical contacts provide substantial uniform internal pressure distribution and substantially uniform electrical contact.

This enables the tooth surface pressure occurring between the ring gear (R2) and pinion members (Q1), (Q2) of the second-mentioned pinion to be distributed.

The hydrodynamic pressure distribution of a suite of bearing surfaces with different micropore geometries and densities is modeled numerically.

By integrating in time the electrical signal it is then possible to determine the distribution of pressure on such a footprint area.

Data (maximum and average pressure,expressed in mbar) is collected from a pressure distribution map.

The at least one shuttle valve controls distribution of hydraulic pressure applied through the choke line to the internal porting mechanism for selective distribution of power to the hydraulically-actuated device.

We will then use the pressure measurements at each pressure tap to examine the pressure distribution and determine the drag forces on the cylinder.

During swing, the slope at the fore part of the sole is adjusted optimally by itself by the pressure distribution of foot.

Figure 1 shows a schematic of the pressure distribution over an airfoil.

The image can reflect distribution of contact pressure, and can reflect pressure distribution and pressed order of the substances.

Liquid drains from the first and second plenum chambers regardless of a pressure difference between a pressure in the first plenum chamber and a pressure in the second plenum chamber.

A pressure sensor measures fluid pressure in the delivery conduit.

More specifically, a dispense motor may be controlled to substantially maintain a baseline pressure in the dispense chamber before a dispense based on a pressure sensed in the dispense chamber.