Dictionnaire français - anglais

électronique et électrotechnique - iate.europa.eu
Application of flow-through three-dimensional electrodes for regeneration of plating iron electrolytes: 1. mathematical model... Possible dynamic changes in the parameters of electrode, electrolyte and the process are taken into account in the mathematical model, such as electro-conductivity of electrode material, electrolyte flow rate, material porosity and specific electrode surface, concentrations of electro-active substances and other characteristics within the local volume of electrode....
général - core.ac.uk - PDF: doaj.org
Modeling of single flow zinc-nickel battery for system efficiency improvement... The model consists of both battery stack part and pump power part, which consequently not only predicts accurately the battery electrical output, but also estimates the pump consumed power at different electrolyte flow rate....
Ecm machining of curvilinear rotary surfaces by a shaping tool electrode performing composite motion... Distributions of: gap thickness, current density, void fracture, temperature, electrolyte flow rate and pressure have been presented in charts
Electrowinning of nonnoble metals with simultaneous hydrogen evolution at flow-through porous electrodes iii. time effects... The effects of electrolyte flow rate, cell current, and electrode thickness on the concentration-time relations and coulombic efficiency-time relations were studied....
Equivalent circuit model construction and dynamic flow optimization based on zinc–nickel single-flow battery... In addition, under the rated electrolyte flow rate and different charge⁻discharge currents, the estimation of Coulomb efficiency by the simulation model is in good agreement with the experimental values....

Traductions en contexte français - anglais

Ces cellules peuvent être renfermées dans un boîtier de cellules garantissant des relations nominales de débit de l'électrolyte en direction de l'électrode.

The cells can be contained in a cell box that will provide the desired flow-through relationship for the electrolyte to the electrode.

technologie et réglementation technique - wipo.int
L'outil cathodique (20) est étanche à une extrémité de manière à isoler un électrolyte (30) sur les cannelures (22) de celui-ci afin de le rendre étanche au débit de l'électrolyte (30) dans l'outil (20) et dans l'alésage cannelé (12d) fini.

The cathode tool (20) is sealed at one end for isolating electrolyte (30) over the flutes (22) thereof to seal against flow of the electrolyte (30) past the tool (20) and into the finished fluted bore (12d).

industrie mécanique - wipo.int


1 milliard de traductions classées par domaine d'activité en 28 langues