Dictionnaire français - anglais

industrie mécanique - iate.europa.eu
Effects of ellipse preforming on cross-sectional shapes of square steel pipe formed by roll forming+... When the diameter of the top roll is larger than that of the side roll, the width of a corner part of the formed pipe is larger than the height....
industrie mécanique / technologie et réglementation technique / concurrence - core.ac.uk - PDF: www.jim.or.jp
politique et structures industrielles - iate.europa.eu
Stud damages on alvestakubb...Alvesta.Data was collected from six harvesters with different combinations of feed roller and upper roller types....
général - core.ac.uk - PDF: stud.epsilon.slu.se
Modeling air entrainment and transport in a hydraulic jump using... In contrast, in the upper roller region behind the toe, the averaged results of the DES turbulence model gives accurate predictions while a RaNS turbulence model does not....
Effect of asymmetric rolling process on the microstructure, mechanical properties and texture of az31 magnesium alloys sheets produced by twin roll casting technique ... In this study, for the ASR process the rolling speed ratio between upper roller and lower was selected as 1.25....
Effect of asymmetric rolling process on the microstructure, mechanical properties and texture of az31 magnesium alloys sheets produced by twin roll casting technique... In this study, for the ASR process the rolling speed ratio between upper roller and lower was selected as 1.25....
 PDF: doaj.org
Design and simulation of the hydraulic synchronous control system of the upper roller in bending machine... This paper sketches the overall structure of the hydraulic system of bending machine, and designs the hydraulic synchronous control system of the upper roller in bending machine....
politique et structures industrielles - iate.europa.eu
Forming 3d sheet metals by means of continuous rolling method... The transversal shape of the sheet metal can be realized by regulating the controllable equipment to make the axis of bendable roller bent; the longitudinal shape is formed by driving the three bendable rollers rotated and the top roller making a displacement synchronously....
général - core.ac.uk - PDF: www.scientific.net
43 investigation into improved extraction... Lift of top roller by measuring opening between top and bottom halves of the mill roll bearing
Analytical model for prediction of force during 3-roller multipass conical bending and its experimental verification... In this conical bending process, the blank is given static bending by placing the blank over the bottom rollers and lowering the top roller....
Bendability analysis for bending of c-mn steel plates on heavy duty 3-roller bending machineAbstract—Bendability is constrained by maximum top roller load imparting capacity of the machine....
Modal–cotton fibre blend ratio and ring frame parameter optimisation through the taguchi methodThe influence of Modal–cotton (MC) fibre blend ratio and ring frame machine parameters such as front top roller loading and break draft on the blended yarn properties has been studied....
 PDF: doaj.org

Publications scientifiques

Refereed paper operation of sugar mills with individual variable speed drives... This paper presents the results of the tests carried out in Santa Isabel sugar mill in Brazil, when each four roll mill of four mill tandems was driven by four hydraulic motors of the same size; two of them mounted on the both sides of the top roll and one of them on each inferior roll....
général - core.ac.uk - PDF: citeseerx.ist.psu.edu
Asymmetric shape control theory and practice in cold strip mills... For the mills with inverse symmetry roll shifting system, different roll wear and thermal contour of top roll system and bottom roll system could cause asymmetric shape defects during shifting operation....
général - core.ac.uk - PDF: www.scientific.net
Axial force analysis and roll contour configuration of four-high cvc millIn order to analyze the influence of technical parameters on work roll axial force of four-high continuous variable crown (CVC) mill, the deformation analyzing model with top roll system and strip was established based on influence function method....
général - core.ac.uk - PDF: doaj.org
Investigation into the numerical model behaviour of belleville washers in cold roll forming... the 'unknown' spring acting on the top roll during the forming process due to the implementation of Belleville washers in the pillar set up....
général - core.ac.uk - PDF: core.ac.uk

Exemples français - anglais

communication / technologie et réglementation technique / chimie / politique et structures industrielles - iate.europa.eu
industrie mécanique / chimie / politique et structures industrielles - iate.europa.eu
industrie mécanique / communication / politique et structures industrielles - iate.europa.eu
électronique et électrotechnique - acta.es
industrie mécanique / communication / migration / technologie et réglementation technique - iate.europa.eu
politique et structures industrielles / technologie et réglementation technique - iate.europa.eu
[...]


1 milliard de traductions classées par domaine d'activité en 28 langues