Nouveau : Traduire du texte avec ChatDico – 172 langues

Dictionnaire français - anglais

coupe discontinue

interrupted cutting

industrie mécanique - iate.europa.eu

▷

Cutting mechanism and model for cutting al/sicp composites... A detailed investigation suggests that the cutting instinct of Al/SiCp is of interrupted cutting process....

général - core.ac.uk - PDF: www.scientific.net

Electro-chemical grinding... Technique eliminates galling and permits constant surface finish and burr-free interrupted cutting

PDF: hdl.handle.net

Thermal imaging experimental research on temperature field for milling insert... During the process of interrupted cutting, milling insert suffers from periodic thermal shock....

PDF: www.scientific.net

Research on finite element simulation and experiment of temperature field in surface cutting used a new pdc cutter... The new PDC cutter has fibers that are artificially ordered so as to have the desired geometric angles, and it has a larger number of the cutting edges, enough space for holding chips and interrupted cutting so that it is easier to release heat....

PDF: www.scientific.net

*2 hiroshima institute of technology polytechnic high-efficiency cutting of super-heat-resistant alloy... Tool life in interrupted cutting is shorter than during continuous cutting because the built-up edge is removed, causing the coating film to flake when the tool parts from the workpiece during...

PDF: www.mhi.co.jp

intermittent cut

industrie mécanique - iate.europa.eu

▷

The effect of time intervals on heat transfer to the implant-bone interface during preparation of a titanium abutment: an in vitro study...seconds.Conclusions: Within the limitation of this study, it was concluded that toreduce the thermal damage on the bone tissue, an intermittent cut up to 20seconds is acceptable....

général - core.ac.uk - PDF: doaj.org

Performance of coated and uncoated inserts during intermittent cut milling of aisi 1030 steel AbstractKnowledge of tool behaviour during intermittent cut machining of various work material is much required in order to improve the efficiency of the machining process....

intermittent cutting

industrie mécanique - iate.europa.eu

▷

Spindle rotational speed effect on milling process at low cutting speed AbstractThe spindle rotational speed fluctuates during milling due to intermittent cutting forces applied to the spindle, but the speed effect when machining with a relatively large cutter at low cutting speeds is still not clear....

général - core.ac.uk -

Surface treatment of high speed steel tools... The results are as follows: "X"tips by name have the highest hardness and performance on continuous cutting than the others, but they have the lowest toughness and larger chipping on intermittent cutting....

PDF: fukuyama-u.repo.nii.ac.jp

International journal of machine tools & m nt... However, in the intermittent cutting such as Several studies on the application of MQL in machining of steels had been conducted [4–14]....

PDF: ntur.lib.ntu.edu.tw

Machinability of smart forging process materials in intermittent cutting: 2nd report : machinability in normal cutting region and selection of optimum cutting condition... In the previous paper [1], we reported the progress of tool wear of this forged material in the high-speed cutting region with the cutting speed of 200 m/min or more in intermittent cutting....

PDF: www.e3s-conferences.org

Modeling and simulation of high speed intermittent cutting based on the finite element method... In order to study the distribution of the stress field in the high-speed intermittent cutting process, finite element model of high-speed intermittent cutting is established....

PDF: www.scientific.net

interrupted cut

industrie mécanique - iate.europa.eu

▷

Shock number determination for disal d210 ceramic cutting inserts during interrupted machining... Experiments were provided at special fixture – interrupted cut simulator....

général - core.ac.uk - PDF: citeseerx.ist.psu.edu

Implications of high strain deformation in grinding... In this study well formed burrs were observed in 'interrupted cut' grinding whereas in more continuous grinding, redeposition is suggested to be a contributor to burr formation resulting in a partial breakdown of the burr....

PDF: dx.doi.org

Sandvik ceramic cutting tool tests with an interrupted cut simulator... Tests will be provided on fixture – interrupted cut simulator....

PDF: citeseerx.ist.psu.edu

Testing of disal d240 and d420 ceramic tool materials with an interrupted cut simulator... Experiments were performed on a special fixture — the interrupted cut simulator....

PDF: citeseerx.ist.psu.edu

Testing ceramics inserts at irregular interrupted cut on material 14mov6This article deals with the test of removableceramic cutting inserts during machining with anirregular interrupted cut....

PDF: hrcak.srce.hr